SET OF 3 - BOW HOLDER Bow Hanger Sublimation Blank Unisub Mdf

3 Pcs HAIR BOW HOLDER, sublimation Blanks, Bow Hanger, Diy, Unisub, Mdf, Hardboard, Door Hanger, Wall Décor, Nursery Décor, Girls Room Décor
The matching design can be found here: https://www.etsy.com/listing/1133161458/sublimation-designs-downloads-bow-holder?ref=listings_manager_grid
TEMPLATE AVAILABLE AFTER PURCHASE
Hardware is not included
100% Made in the USA
Choice of 
1. Gloss White Unisub Sublimation Hardboard Blank
2. Double Sided Unisub Mdf
3. Clear Acrylic that can be sublimated on
4. White Acrylic that can be sublimated on.
5. 1/8 Plywood (can not be sublimated on) You must paint this one yourself.
Quantity:  Choose from Drop Down Box
Thickness:  1/8" 
Coating:  All have a Clear, Peel-Away Film that needs to be removed before pressing.
Manufactured:  Made in USA by Me
The matching Sublimation Designs can be found here: 
** Please inquire about other custom cut shapes or designs. **
Heat press settings:
- temperature - 385 degrees F
- dwell time - 55-60 Seconds
- pressure - medium
Sublimation Instructions:
Layer the press from the bottom pad to the top heat platen as follows:
1. Scratch paper (I use butcher paper)
2. 2-3 layers of soft paper towel
3. substrate (this item)
4. transfer (your design)
5. Scratch paper
Steps:
1. Remove the protective plastic coating if any from the substrate.
2. Use a lint-free towel to remove any loose debris from the substrate if necessary.
3. Position the substrate onto the transfer and adhere transfer to substrate using heat tape. 4. Place the transfer and substrate in the press onto the paper towel (transfer on top of substrate).
5. Place the Teflon sheet or scratch paper over the transfer.
6. Press the items using the sublimation settings listed above.
7. Remove items from the press immediately. Use heat resistant gloves if necessary - the items will be very hot.
8. Remove transfer from substrate.

Tips:
- If the image of the final product appears light increase the pressure or the dwell time slightly (5-15 seconds).
- If the image on the final product appears blurred or substrate appears yellowed reduce the dwell time slightly (5-15 seconds).
 Hardboard Mdf Whiteboard Unisub Wholesale Sublimation 
sublimation blanks, Bow Holder, Hair Bow Holder, Sublimation Bow Holder, Bow Hanger, Wall Hanger, Door Hanger, wooden bow holder,